If you’re on the hunt for the perfect go-to laser rangefinder for bow and rifle hunters alike, you’ve found it in the Crossfire HD 1400. Not only does the Crossfire HD 1400 have everything you need and nothing you don’t, it’s a lightweight powerhouse that’s at home in a bowhunter’s pack and in an ultralight hunter’s loadout. With a 1,400-yard max range (750 on deer), you get plenty of power to range and, thanks to the HD optical system, you’ll have the power to pick apart any landscape. To match any hunting environment, the Crossfire HD 1400 has three target modes (Normal, First, Last) and two ranging modes (HCD and LOS). A red TOLED display keeps the readout clear in any lighting conditions and, at just 4.8 ounces, the Crossfire HD 1400 hunts hard and carries light.

Horizontal Component Distance Mode

The HCD range display is intended to be the primary mode—used for most rifle and archery shooting conditions. The yardage number displayed is the critical horizontal component distance. The displayed HCD yardage number is corrected for shot angle & needs no extra user input; shooters simply use the appropriate level ground drop & wind adjustment for the range displayed and shoot. Archers use the appropriate level ground sight pin for the range displayed and shoot.

Line of Sight Mode

The LOS (Line of Sight) mode is intended for rifle shooters who are using slope correcting ballistic drop data cards, ballistic solvers & who are shooting at distances beyond 500 yards and with slopes greater than 15 degrees. Most shooters and archers will not need the LOS mode.

The range number displayed in LOS mode is the actual line of sight range with no ballistic correction for slope. Most of the commonly used ballistic devices can provide independent slope correction for drop data and require actual line of sight range input. Using the LOS range when calculating wind drifts under these steep slope/long range conditions will provide a higher degree of accuracy than using the HCD range.

Scan Feature

Activate Scan Ranging by pressing and holding the “Measure” button. Keeping the button depressed will continuously measure distance as you pan back & forth across target objects. The reticle will blink as you pan. Releasing the “Measure” button will return laser to the Power Up condition.

Included in the Box:

Soft Carry Case, Wrist Lanyard, Bungee Cord Lanyard, Lens Cloth, Hook & Loop Harness Attachment, & CR2 Battery.

 

Note about our photos:
While we make every effort to ensure that our product photos are accurate, manufacturers occasionally change the design of components such as triggers, sights, or magazines without notice. Also, modifications to the firearm or component may be required in order to meet specific state compliance requirements. While we make every effort to accurately describe and illustrate the item you are going to receive, there may be visual differences on various components that do not affect functionality.